Mark2 Software
Mark2 3D Printer
Introduction
Getting Started
Printrun / Pronterface
- Download
- Open
- Quick explanation of settings
Slic3r
- Download
- Open
- Quick walkthrough of different slicing settings
- Profile for Mark2 Printer
Testing the Printer
- Connect with Pronterface
- Heat things up
- Test Endstops
- Move things around
- If something doesn't work, double check all connections (with power off). Check troubleshooting page.
Going Further
OctoPrint
Cura
Simplify3D
- Profile for Mark2 Printer
Resources
http://reprap.org/wiki/RepRap_Options#CAM_Tools