Mark2 Software
Revision as of 01:20, 13 September 2015 by Chris (talk | contribs) (→Testing the Printer: Testing my new warning boxes)
Mark2 3D Printer
Introduction
Getting Started
Printrun / Pronterface
Slic3r
- Profile for Mark2 Printer
Testing the Printer
- Heat things up
- Test Endstops
- Move things around
Going Further
OctoPrint
Cura
Simplify3D
- Profile for Mark2 Printer
Resources
http://reprap.org/wiki/RepRap_Options#CAM_Tools