Mark2 Calibration
Jump to navigation
Jump to search
Mark2 3D Printer
Introduction
This page documents the steps that need to be taken to get your printer dialled in and calibrated for high-quality printing. It describes the most important steps, the things that you'll definitely need to do if you want to get good results - but there's a lot more info out there on the topic of calibration, and this guide can't cover it all. Check the Resources section to see other guides on the topic.
Temperature PID
Extruder Calibration
Z Offset
XYZ Axis Calibration
Resources
http://reprap.org/wiki/Calibration