Difference between revisions of "Mark2 Prints"
Jump to navigation
Jump to search
(Added big rocket) |
|||
| Line 11: | Line 11: | ||
|- | |- | ||
|[[File:Mark2-sample-boat1.jpg|frameless|500px]] | |[[File:Mark2-sample-boat1.jpg|frameless|500px]] | ||
|Full steam ahead! The large convex hull at the front of the boat is challenging to print, and requires very quick cooling to stay in shape. | |Full steam ahead! The large convex hull at the front of the boat is challenging to print, and requires very quick cooling to stay in shape. Bridging the arch in the doorway is similarly dependent on quick cooling. | ||
|[http://www.thingiverse.com/thing:763622 3DBenchy] | |[http://www.thingiverse.com/thing:763622 3DBenchy] | ||
|- | |- | ||
Revision as of 23:16, 30 November 2015
Mark2 3D Printer
| Image | Notes | Object Source |
|
Octopi guarding their ill-gotten gains. Probably. High repeatability in the XY axes allows for consistent perimeter lines, and a smooth, clean surface finish. | Cute Octopus Says Hello |
|
Full steam ahead! The large convex hull at the front of the boat is challenging to print, and requires very quick cooling to stay in shape. Bridging the arch in the doorway is similarly dependent on quick cooling. | 3DBenchy |
|
Bridging and steep overhangs also benefit from significantly from the cooling fan. | 3DBenchy |
|
To space! By printing in spiral (or vase) mode, this large rocket (180mm tall) took only 85 minutes to print. Cooling becomes critical in the later layers, as the rocket thins out. | Single-Perimeter Rocket |
|
That's not a rocket - this is a rocket! Printed from two separate 180mm tall pieces, excellent dimensional accuracy allow the two pieces to friction-fit together easily. | Candy Filled Rocket |