Mark2 Prints

From Aus3D Wiki

Revision as of 21:23, 30 November 2015 by Chris (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Mark2 3D Printer

Documentation | BOM | Assembly | Electronics | Firmware Setup | Software Setup | Calibration | Printing | Troubleshooting | Sample Prints | Upgrades & Modifications

Image	Notes	Object Source
	Octopi guarding their ill-gotten gains. Probably.	Cute Octopus Says Hello
	The large convex hull at the front of the boat is challenging to print, and requires very quick cooling to stay in shape.	3DBenchy

Retrieved from "https://wiki.aus3d.com.au/index.php?title=Mark2_Prints&oldid=272"

Mark2 Printer