Mark2 Prints
Jump to navigation
Jump to search
Mark2 3D Printer
Image | Notes | Object Source |
Octopi guarding their ill-gotten gains. Probably. High repeatability in the XY axes allows for consistent perimeter lines, and a smooth, clean surface finish. | Cute Octopus Says Hello | |
Full steam ahead! The large convex hull at the front of the boat is challenging to print, and requires very quick cooling to stay in shape. | 3DBenchy | |
Bridging and steep overhangs also benefit from significantly from the cooling fan. | 3DBenchy | |
To space! By printing in spiral (or vase) mode, this large rocket (180mm tall) took only 85 minutes to print. Cooling becomes critical in the later layers, as the rocket thins out. | Single-Perimeter Rocket | |
That's not a rocket - this is a rocket! Printed from two separate 180mm tall pieces, excellent dimensional accuracy allow the two pieces to friction-fit together easily. | Candy Filled Rocket |